Cisco2511路由器的PPP配置
日期：2006-09-09 荐：
____Route#sh conf ____Using 1390 out of 32762 bytes ____! ____version 11.1 ____service udp-small-servers ____service tcp-small-servers
____! ____hostname Router ____! ____enable secret 5 $1$Mpdg$2GnR7b4wj1RAHky.tM51m/ ____enable password Cisco ____! ____username user1 password 7 021606481857 ____username user2 password 7 120904040159 ____username user3 password 7 140713181F57 ____username user4 password 7 105E080A1643 ____username user5 password 7 105E080a1642 ____username user6 password 7 044B0A151C77 ____! ____interface Loopback1 ____ip address 200.200.200.18 255.255.255.0 ____! ____interface Ethernet0 ____ip address 20.23.28.53 255.255.255.0 ____! ____interface Seria10 ____no ip address ____shutdown ____no fair-queue ____! ____interface Serial1 ____no ip address ____shutdown ____! ____interface Group-Async1 ____ip unnumbered Loopback1 ____encapsulation ppp ____keepalive 10 ____async default routing ____async dynamic routing ____async mode dedicated ____down-when-looped ____ppp authentication pap ____no cdp enable ____group-range 1 8 ____! ____router eigrp 200 ____redistribute connected ____redistribute rip ____network 20.0.0.0 ____network 200.200.200.0 ____passive-interface async1 ____passive-interface async2 ____no auto-summary ____! ____router rip ____version2 ____redistribute connected ____network 20.0.0.0 ____network 200.200.200.0 ____passive-interface async1 ____passive-interface async2 ____no auto-summary ____! ____ip route 200.200.200.1 255.255.255.255 Async5 ____ip route 200.200.200.2 255.255.255.255 Async4 ____snmp-sever community public RO ____! ____line con 0 ____line 1 8 ____modem InOut ____transport input all ____stopbits 1 ____rxspeed 19200 ____txspeed 19200 ____line aux 0 ____exec-timeout 0 30 ____password cisco ____login ____modem InOut ____transport input all ____stopbits 1 ____line vty 0 4 ____psaaword cisco ____login ____! ____end
标签：